PBX: Open Source (Asterisk)

• High performance OSLEC (Open Source Line Echo Canceller)
• Configurable IVR menus
• Voice Mail,Voicemail to Email
• Call forward, call waiting, call transfer
• Conference bridge, call queues
• SIP/IAX2 trunking
• 8 analog ports (FXO/FXS)
• Call Detail Records
• Access via: SSH, HTTP
• 20-50 concurrent calls (depending on codec and file system access)

Router: Linux-based (kernel 2.6.32)

• Automatic MDI/MDI-X crossover on all ports
• Full 100Mbps supported on all ports
• 802.1Q tag-based VLAN (16 VLANs, full range VID)
• VLAN ID and 802.1P tag/untag option per port
• QoS/CoS per port 802.1p and DiffServ-based
• 802.1D spanning tree protocol support
• Extensive MIB counter management support
• 802.11b/g/n WiFi support with add-on mini PCI card

Router

• CPU: Micrel KS8695P SOC
• OS: Linux kernel 2.6.32
• ARM 922 Core running at 166MHz
• on-chip 8K instruction cache and 8K data cache
• on-chip XceleRouter with 1 WAN + 4 LAN port switch
• external Mini-PCI interface implemented to support the EnGenius EMP9602 Wireless Card (Atheros AR9160 + AR 9103) 802.11/n
• 8 MByte FLASH
• 32 or 56 (RP08+) MByte SDRAM

PBX

• ADSPBF537 @ 600 MHz
• Astfin 2.1
• 4MByte FLASH
• on-chip 132K instruction/data cache
• 64 or 128 (RP08+) MByte SDRAM
• Persistent storage on SD or CF Card
• on-chip 10/100 MAC with external PHY directly coupled to LAN1 connection of router
• on-board 10/100 MAC/PHY - WAN dedicated to voice traffic, may be used as failover WAN for data traffic
• on-board battery backed-up RTC
• 8 port analog interface

External ports

• 1 Router WAN (RJ45)
• 1 PBX WAN (RJ45)
• 3 Router LAN (RJ45)
• 8 Analog Ports (RJ11), port 1 and 8 can be configured as router/pbx console output
• 1 USB (type A)
• 1 SD Flash

Internal Connectors

• 16 bit external memory interface to both CPUs (currently used by the USB and CF modules)
• mini-PCI (on KS8695P)

Add-on Modules

• Single port FXS
• Single port FXO
• 802.11 g/n mini-PCI wireless cards
• Compact Flash card interface (Q2 2010)
• USB interface (Q2 2010)
• 2-Way Radio interface (Q2 2010)
• GSM (Q3 2010)
• ISDN (Q3 2010)
• T1/E1 (Q3 2010)
• G729 (Q3 2010)

Power requirements: 7.5 V, 1.5A DC

External Dimensions: 6.2 x 9.1 x 1.5 in
PCB Dimensions: 5.7 x 8.6 in

	RP08 Appliance	USD $450
	RP08+ Appliance	USD $500
	Single Port FXS Module	USD $35
	Single Port FXO Module	USD $35
	WiFi Expansion Kit EnGenius EMP9602 card + 3 antennas	USD $75

Tinyworx

2466 Hemus Sq.
Mississauga, ON L5C 3X2
Canada

Tel: ++ 1 (416) 642 6050
Technical Inquiries: Jim Mitchell, ext 202
General Inquiries: contact @ tinyworx.com